Tahmazo Pro.C Max Programming Box is designed to make the programming of the Pro.C Max speedcontrollers easier and faster. It displays the programmeable parameters of the speedcontroller on its LCD screen.
With the Pro.C Max Programming Box, you can program different parameters, view last flight data such as maximum RPM and Average RPM and store and transfer settings to/from the speedcontroller.
The programmeable features using the Pro.C Max Programming Box are:
* Battery type
* Cut off voltage
* Cutt off type
* Motor direction
* Advance timing
* Start Power
* Amount of air brakes (or switch off air brakes) - only in aircraft mode
* Response of Governor - only in helicopter mode
* Reverse function - only in boat/car mode
* Restore or backup parameter to/from Pro.C Max speedcontroller
This is the iMax B6 Quattro charger.
The iMax Quattro B6 allows you to plug 4 batteries into on charger simultaneously, and it will intelligently and automatically charge all 4 of them at once to their maximum capacity. To top of it, the batteries being charged do not even need to have the same configuration. You can connect different chemistry (Ni-Mh/Ni-Cd/LiPo/LiFe) batteries into any of the charging ports.
● Input: DC 11 to 15V
● Power source: 12V DC (Car battery)/ AC mains Power Supply Unit (>200Watts)
● Charger power: 50 Watts, current is regulated accordingly.
● Discharger power: 5 Watts, current is regulated accordingly.
● Cell count: 1-15 NiCd/NiMH cells; 1-6S LiPo/Li-lon/LiFe cells; 1-10 Lead-Acide cells (2V to 20V).
● Current drain for balancing Lithium: 300mA
● Charge termination: Automatic, negative delta peak method for NiCd/NiMh; and automatic, voltage-dependent, CC-CV process.
● Dimensions: 225.4 x 158.6 x 62.4mm
● Net weight: 1.09kg
1 x iMAX B6 Quattro Charger
1 x Pair Alligator clips for Pb battery
1 x Alligator to bullet connector cable
1 x JST to bullet connector cable
1 x Futaba to bullet connector cable
1 x Tamiya to bullet connector cable
1 x Bullet connector with wire
1 x TP/FP adaptor
1 x XH adaptor
1 x Instruction manual
iMax B6AC Multifunctional Balance Charger /Built-in AC Adapter
FEATURES : Just released in 2008!!NEW Design!!
Charger balancer 1 to 6 elements LiPo / LiIo / LiFe load NiMh, NiCd and Pb 6 or 12V.
Load balancing 1 to 6 elements LiPo / LiIo / LiFe load NiMh, NiCd and Pb 6 or 12V.
IMAX B6AC Professional Balance Charger / Discharger (Built-in AC Power Supply)
Operating voltage : DC11.0~18.0 Volt
AC in : 100V~240V 50/60Hz
Max. charge power 50W
Max. discharge power 5W
Charge current range : 0.1~5.0A
Discharge current range : 0.1~1.0A
Current drain for balancing Li-Po : 300mAh/cell
NiCd/NiMN Battery count : 1~15cell
Li-Po cell count : 1~6cell
Pb battery voltage : 2V~20V
Weight : 531g (net weight)
Dimensions : 134 x 142 x 36 mm
SPECIFICATIONS : 1. Operating voltage range :DC11.0-18.0 Vult AC100-240V,50/60Hz
2. Circuit Power : MAX.charger power 50W ;Max. discharger power 5W
3. Charge current range : 0.1~5.0A
4. Dicharge current range : 0.1~1.0A
5. Current drain for balacing Li-poer : 300mAh/cell
6. NiCd/NiMh : 1 ~ 15 Cells
7. Li-ion/Polymer : 1 ~ 6 Cells
8. Pb battery vultage : 2V or 20V
9. Weight : 580 g
10. Dimension : 133mm x 87mm x 33mm
ITEM INCLUDE :
1 x IMAX B6-AC charger
1 x DC clamp
1 x Multifunctional extension wire
1 x Igniter plug
1 x JST plug
1 x DuPont plug for receiver
1 x English manual
220V and 12V input charger with 6s 6Amp max. charge with built-in LBA10 balancer.
EOS0606i AD shares features with EOS 0606i DC. However, the simplicity of 110V/220V connectivity is compelling for charging your Tx at home or to replace that weak wall-socket charger that came with your newest RTR/RTF toy. Just plug in and charge. Simple as that.
1. DC 12V equipment
2. Convenient & easy to use
3. 3 sets of power supplies for
a. 12V engine starter or 12V electric fuel pump
b. 1.2V glow plug, adjustable current
c. 1.25V Ni-starter charge terminal
4. Polarity reverse protection
Hyperion EOS LBA10 Balance Charge Adapter 2S~6S 10A Max
•New balance unit from Hyperion
•Charge with 10A
•Network 2 LBA10 for 12S balancing
New Hyperion EOS LBA10A Net - The Most Powerful, Versatile Balance-Safety Adapter for Lithium Packs. Max 6S, 10A rating - Network 2 units for 7S~12S balancing.
The Hyperion EOS Lithium Balance Adapter 10 (LBA10) is the newest, most feature-packed and reliable lithium balancer on the market today, and comes at a bargain price. Simply put, it is the most powerful, versatile, and safest way to charge your lithium packs. A single LBA10 provides three ways to balance your lithium packs from 2S to 6S, at a maximum of up to 10-ampere rate!
Or, you can network two LBA 10 together with NET cable and adapter pack #HP-EOSLBA10-MSC. Set one LBA10 to Master and one to Slave mode. Series the LBA input leads together, and connect to a charger with appropriate S rating. Now you can charge two packs of same cell type and capacity (such as 6S and 6S) at the same time, and every cell in both packs will be balanced to the other when charging is done. Connect the packs in series and fly, with balanced packs from 7S to 12S in this way!
Or, say you have two 5S chargers, and want to charge two 5S packs to connect and fly as 10S. Use each LBA10 in Master mode, and connect each to a separate charger and battery. When charging is finished, Connect the two LBA10 together in Master-Slave configuration, and connect them to the just-charged lithium packs. The LBA10 will work together until every cell in the two packs are balanced together, then automatically shut down. Takes only a few minutes. Now series the packs together and fly in peace!
Each LBA 10 comes with balance harnesses for 2S and 3S packs. For 4S to 6S packs, get the appropriate optional harnesses from these part numbers:
The LBA 10 also has a DataPort (use optional cable HP-EOSLBA10-DPC) which will allow you to monitor the individual cell voltages while you balance, using the LCD screen of any HYPERION charger which has DataPort option.
Hyperion EOS 0720i Super DUO3 charger - 2 x 1S-7S, 20A max, 1000W
* Hyperion's most powerful charger to date!
* 1000W total - 500W per port
* Charger delivered with HP and XH lipo adapter plates, USB cable and clips
* EOS 0720i SDUO3 DC INPUT 11V~28V
* Charge a split-pack in network mode using both ports for up to 14S at 1000W max.
The EOS 0720i Super Duo is Hyperion's flagship charger for 2011 - now available for ordering.
The Super DUO is not to be confused with past models bearing the 0720 designation as they were all single-port chargers. This charger is sporting two identical output ports, each port capable of providing 500W of raw charging power. "0720" is to be interpreted as 7 Cells max - 20Amps max - per port, being a DUO charger.
This is a nomenclature consistent through the Hyperion charger range.
In order to provide all 500W per channel (1000W total), the Super DUO needs 24V-28V of input voltage but can naturally also be operated on lower input voltages (from 11V).
By popular request, Hyperion is for the first time offering two displays in a DUO charger. The benefits are obvious - easy monitoring and less confusion. Like the past DUO's, operation is from a single set of buttons with a channel selector.
The EOS 0720i Super DUO3 is Hyperion's most powerful charger to date!
TP610C 1 to 6-Cell LiPo and A123 cells, 14 NiCd/MH cells and 6-12V Pb, it can charge, Balance, discharge and cycle batteries and report back full data. It is capable of up to 10 amps (80 watts total) for charging.
The Thunder Power 1010C Li Poly Battery Super Charger/Discharger is one of the easiest to use and most advanced LiPo chargers available. The Thunder Power 1010C charger is designed specifically to charge lithium ion and lithium polymer batteries. It provides a number of safety features such as an over-charge cutoff and a data port to communicate with a cell balancer. The balancer data link cable is included. When using a balancer such as the Thunder Power 205V or 210V, the 1010C charger will provide an imbalance cutoff and allows you to monitor each individual lipo cell in the battery. Because the charging system is extremely safe you will be able to charge at high rates allowing for shorter charge times. A 12V power supply is required to power this charger. You can use a 12V battery but we recommend the RipMax Pro-Peak 20A power supply. The Thunder Power 1010C Programmable LiPo Charger/Discharger Features:
Hi-efficiency digital power system
Backlit LCD display
Individual cell over-charge protection capability
Discharge with selectable cut-off voltage
Automatic fan control for quiet operation
Balance charge capability (when used with Thunder Power 205V or 210V LiPo balancer)
10 programmable memory charge parameter settings
Data port for communication with a Thunder Power balancer (205V or 210V)
Programming port for use with Thunder Power 1010C USB Programming Cable (sold separately)
What's Included In The Box:
1 x Thunder Power 1010C LiPoly Charger
1 x Data Link Cable (to connect to a Thunder Power balancer)
1 x Red + Black wired alligator clips to connect to a 12V power supply
* 12V 20A Switching Power Supply
* The Switching Power Supply has wide input voltage range, steady and precise output voltage.
* Full load burn-in test.
* Over current, over voltage, short circuit protection.
Input voltage: AC100V-120V ;AC 200V-240V
* Output voltage: 12V
* Output current: 20A
* Output voltage adjustment range: ±10%
* Size: ~20 x 11 x 5cm (L*W*D)
* CE Certification
* Color: as photo shown